iPower GM5208 Brushless Gimbal Motor 12-Pole DSLR / LiDAR UAV Pod Motor
154,00 € – 167,00 €
Get 25 % off! With code NEW2026
high-torque brushless gimbal motor for dslr cameras, red epic, and airborne lidar pods
the ipower gm5208 is a precision brushless gimbal motor engineered for large-scale multi-rotor platforms requiring high torque and smooth stabilization. designed to support dslr cameras (canon 5d mark ii/iii), red epic, and airborne lidar pods, the gm5208 delivers 1800-2500g of load torque with a hollow shaft design for clean cable routing. available in two winding configurations — gm5208-12 and gm5208-24 — to suit different gimbal controller requirements and stabilization applications. both variants feature a 2.5mm dupont connector, 610mm #24awg lead wire, and are rated for 3-5s operation at up to 40w maximum power.
key features
- high load torque – 1800-2500g for dslr and cinema camera stabilization
- hollow shaft design – od ø15mm for clean internal cable routing
- two winding options – gm5208-12 and gm5208-24 for different controller setups
- 3-5s compatible – flexible voltage range for various gimbal controllers
- max 40w power – efficient high-torque operation
- 610mm lead wire – #24awg with 2.5mm dupont connector
- precision tolerances – rotor runout ≤0.1mm
- wide temperature range – -20°c to 60°c operating range
- high voltage tested – dc500v 10ma @ 1sec
- clockwise rotation – standard axle extension direction
perfect for
- dslr camera gimbals (canon 5d mark ii/iii and similar)
- red epic and cinema camera stabilization
- airborne lidar pod motors
- uav payload turntables
- large-scale multi-rotor gimbal systems
- professional aerial cinematography rigs
- custom brushless gimbal builds
variant options
- gm5208-12 – 12-turn winding, ø63mm diameter, 22.7mm height, 195g, 15.2ω internal resistance, 456-504 rpm no-load
- gm5208-24 – 24-turn winding, ø59.5mm diameter, 31.2mm height, 204g, 13.7ω internal resistance, 396-436 rpm no-load
technical specifications
gm5208-12
- model: gm5208-12
- outer diameter: ø63 ±0.05mm
- motor height: 22.7 ±0.2mm
- hollow shaft od: ø15 -0.008/-0.012mm
- hollow shaft id: ø12 +0.05/0mm
- internal resistance: 15.2ω ±5%
- no-load rpm: 456-504 rpm (at 20v)
- no-load current: 0.09 ±0.1a (at 20v)
- load current: 1a (at 20v)
- load torque: 1800-2500g
- motor weight: 195 ±0.5g
gm5208-24
- model: gm5208-24
- outer diameter: ø59.5 ±0.05mm
- motor height: 31.2 ±0.2mm
- hollow shaft od: ø15 -0.008/-0.012mm
- hollow shaft id: ø12.6 +0.05/0mm
- internal resistance: 13.7ω ±5%
- no-load rpm: 396-436 rpm (at 20v)
- no-load current: 0.09 ±0.1a (at 20v)
- load current: 1a (at 20v)
- load torque: 1800-2500g
- motor weight: 204 ±0.5g
common specifications (both variants)
- wire length: 610 ±3mm
- cable awg: #24
- wire connector: 2.5mm dupont
- maximum power: ≤40w
- working voltage: 3-5s lipo
- working temperature: -20°c to 60°c, 10-90% rh
- rotor housing runout: ≤0.1mm
- rotation direction: clockwise (axle extension)
- high voltage test: dc500v 10ma @ 1sec
- high temp test: 60°c for 100 hours (normal operation after 24h at room temp)
- low temp test: -20°c for 100 hours (normal operation after 24h at room temp)
what’s included
- 1x gm5208 brushless gimbal motor (gm5208-12 or gm5208-24 per selection)
important notes
- ipower gm5208 brushless gimbal motor — available in 12-turn and 24-turn windings
- designed for dslr, red epic, and airborne lidar gimbal applications
- hollow shaft for internal cable routing
- gimbal controller not included
- camera and payload not included
Related products
-
83,00 € – 286,00 € Select options This product has multiple variants. The options may be chosen on the product page -
187,00 € Select options This product has multiple variants. The options may be chosen on the product page -
103,00 € – 116,00 € Select options This product has multiple variants. The options may be chosen on the product page -
54,00 € – 192,00 € Select options This product has multiple variants. The options may be chosen on the product page
T-Motor MN5008 Brushless Motor - KV170/340/400 6-12S, 4.2KG Max Thrust
208,00 €
iPower GM5208 Brushless Gimbal Motor 12-Pole DSLR / LiDAR UAV Pod Motor
154,00 € – 167,00 €
iPower GM5208 Brushless Gimbal Motor 12-Pole DSLR / LiDAR UAV Pod Motor
167,00 €
Get 25 % off! With code NEW2026
high-torque brushless gimbal motor for dslr cameras, red epic, and airborne lidar pods
the ipower gm5208 is a precision brushless gimbal motor engineered for large-scale multi-rotor platforms requiring high torque and smooth stabilization. designed to support dslr cameras (canon 5d mark ii/iii), red epic, and airborne lidar pods, the gm5208 delivers 1800-2500g of load torque with a hollow shaft design for clean cable routing. available in two winding configurations — gm5208-12 and gm5208-24 — to suit different gimbal controller requirements and stabilization applications. both variants feature a 2.5mm dupont connector, 610mm #24awg lead wire, and are rated for 3-5s operation at up to 40w maximum power.
key features
- high load torque – 1800-2500g for dslr and cinema camera stabilization
- hollow shaft design – od ø15mm for clean internal cable routing
- two winding options – gm5208-12 and gm5208-24 for different controller setups
- 3-5s compatible – flexible voltage range for various gimbal controllers
- max 40w power – efficient high-torque operation
- 610mm lead wire – #24awg with 2.5mm dupont connector
- precision tolerances – rotor runout ≤0.1mm
- wide temperature range – -20°c to 60°c operating range
- high voltage tested – dc500v 10ma @ 1sec
- clockwise rotation – standard axle extension direction
perfect for
- dslr camera gimbals (canon 5d mark ii/iii and similar)
- red epic and cinema camera stabilization
- airborne lidar pod motors
- uav payload turntables
- large-scale multi-rotor gimbal systems
- professional aerial cinematography rigs
- custom brushless gimbal builds
variant options
- gm5208-12 – 12-turn winding, ø63mm diameter, 22.7mm height, 195g, 15.2ω internal resistance, 456-504 rpm no-load
- gm5208-24 – 24-turn winding, ø59.5mm diameter, 31.2mm height, 204g, 13.7ω internal resistance, 396-436 rpm no-load
technical specifications
gm5208-12
- model: gm5208-12
- outer diameter: ø63 ±0.05mm
- motor height: 22.7 ±0.2mm
- hollow shaft od: ø15 -0.008/-0.012mm
- hollow shaft id: ø12 +0.05/0mm
- internal resistance: 15.2ω ±5%
- no-load rpm: 456-504 rpm (at 20v)
- no-load current: 0.09 ±0.1a (at 20v)
- load current: 1a (at 20v)
- load torque: 1800-2500g
- motor weight: 195 ±0.5g
gm5208-24
- model: gm5208-24
- outer diameter: ø59.5 ±0.05mm
- motor height: 31.2 ±0.2mm
- hollow shaft od: ø15 -0.008/-0.012mm
- hollow shaft id: ø12.6 +0.05/0mm
- internal resistance: 13.7ω ±5%
- no-load rpm: 396-436 rpm (at 20v)
- no-load current: 0.09 ±0.1a (at 20v)
- load current: 1a (at 20v)
- load torque: 1800-2500g
- motor weight: 204 ±0.5g
common specifications (both variants)
- wire length: 610 ±3mm
- cable awg: #24
- wire connector: 2.5mm dupont
- maximum power: ≤40w
- working voltage: 3-5s lipo
- working temperature: -20°c to 60°c, 10-90% rh
- rotor housing runout: ≤0.1mm
- rotation direction: clockwise (axle extension)
- high voltage test: dc500v 10ma @ 1sec
- high temp test: 60°c for 100 hours (normal operation after 24h at room temp)
- low temp test: -20°c for 100 hours (normal operation after 24h at room temp)
what’s included
- 1x gm5208 brushless gimbal motor (gm5208-12 or gm5208-24 per selection)
important notes
- ipower gm5208 brushless gimbal motor — available in 12-turn and 24-turn windings
- designed for dslr, red epic, and airborne lidar gimbal applications
- hollow shaft for internal cable routing
- gimbal controller not included
- camera and payload not included
Related products
-
48,00 € – 58,00 € Select options This product has multiple variants. The options may be chosen on the product page -
135,00 € Select options This product has multiple variants. The options may be chosen on the product page -
458,07 € Select options This product has multiple variants. The options may be chosen on the product page -
